Improved Grain Basket with 1.5" Sidewall Perforations
The ANVIL Foundry™ is the most versatile all-in-one brewing system available. From the triple element low watt density PATENTED dual voltage heaters for blazing fast heating speeds, to the unique high flow grain basket, you won’t find a more powerful feature-rich product.
Patented Dual Voltage Switchable Between 120V 1600W, 13A and 240V 2800W, 12A for Faster Heating & Better Boils. (240V Standard)
240V/120V Adapter Cable - With this adapter you navigate to 240V for a faster brew day, or brew at the standard electric 120V by simply flipping the switch located on the back of the unit.The only all-in-one on that’s 240/120v
Water Deflecting Screen - The improved screen mount feature has an added gasket with internal water deflecting geometry on the inside to ensure water doesn’t reach the screen.
Serviceable Touch Screen with 4x the Mounting Screws - Servicing the linear digital power control screen was a daunting process, now it’s as simple as removing 4 screws and pulling a single wire cable out of the screen. After swapping the screen, you can plug the unit back in.
Grain Basket Hosts 1.5” of Side Wall Perforations - They aren’t just back, they are improved! The grain basket’s side wall perforations drastically reduce the amount of stuck mashes from happening.
Large Capacity Increases Efficiency and Grain Capacity.
Double Wall Insulation Maintains Mash Temps and Increases Heating Speeds.
Ultra Low Watt Density, Triple Element Heaters - Won't Scorch.
Linear Digital Power Control and Solid-State Switching for Fine Tuning Your Boil.
10.5 Dimensions Tank Diameter = 12.5 inches Distance Across the Handles = 17 inches Height of Base Unit = 29.75 inches Lid = 3.25 inches Total Height = 33 inches Spigot Height from Base = 7 inches Shipping Weight = 38 lbs
Wattage 120V = 1600 watts 240V = 2800 watts
WARNING: This product can expose you to chemicals including Nickel (Metallic), which is known in the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov
Q: Can I make a 2.5 gal batch in the 10.5 gal Foundry?
A: Yes, however there are a couple small sacrifices. The first is that there may not be enough grain to cover the side perforations on the grain basket. This will allow recirculating wort to bypass the grain bed and your wort will not clarify as it would with a deeper grain bed. In addition, you may experience a slightly lower mash efficiency.
Q: Will a Still Spirits Copper Alembic Dome Top fit on the Foundry? A: No, it is a smaller diameter.
Q: What are the heating rates of the Foundry?
Model
10.5 Gallon Foundry
6.5 Gallon Foundry
Volume
6.5
4
120v
1.5
2.4
240v
2.6
4.3
Heating rate expressed in degree per minute in Fahrenheit